PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 02019-2
02019-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DISK,SOLID,PLAIN is a the manufacturer industrial component. Key specifications include jaw_type: RIGHT ANGLED, material: STEEL CORROSION RESISTING OVERALL, overall_length: 7.500 INCHES NOMINAL IN, special_features: COMPONENT OF THE NEUROSURGICAL SOFT TISSUE TRAY, design_designation: KANTROWITZ, jaw_grasping_method: DELICATE RIGHT ANGLED TEETH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-229-8448, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02019-2
NSN: 5340-01-229-8448
FSC: 5340
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
jaw_typeRIGHT ANGLED
materialSTEEL CORROSION RESISTING OVERALL
overall_length7.500 INCHES NOMINAL IN
special_featuresCOMPONENT OF THE NEUROSURGICAL SOFT TISSUE TRAY
design_designationKANTROWITZ
jaw_grasping_methodDELICATE RIGHT ANGLED TEETH
part_name_assigned_by_controlling_agencyFORCEPS HEMOSTATIC KANTROWITZ CRS RT ANGLE TEETH 7.50 O/A LG
NSN5340-01-229-8448
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 02019-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/1, 0 FED SPEC SINGLE MATERIAL RESPONSE
•
DIAMETER: 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
•
THICKNESS: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/1, 0 FED SPEC SINGLE MATERIAL RESPONSE
DIAMETER0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
THICKNESS0.050 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
5867552775Interchangeable
interchangeable cross-reference
interchangeable
55-2775Interchangeable
interchangeable cross-reference
interchangeable
25-836Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02019-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02019-2?
02019-2 is a DISK,SOLID,PLAIN.
What parts can replace 02019-2?
There are 3 known substitutes for 02019-2: 5867552775, 55-2775, 25-836. Substitute compatibility should be verified for your specific system.
What is the NSN for 02019-2?
02019-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-229-8448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02019-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026