PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 020-950-284-04
020-950-284-04 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.167 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.040 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-214-3616, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
020-950-284-04
NSN: 5340-01-214-3616
FSC: 5340
CAGE: 62842 — ALLIED HEALTHCARE PRODUCTS, INC. DBA ALLIED (USA)
SPECIFICATIONS
diameter0.167 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.188 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.529 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.373 INCHES NOMINAL IN
NSN5340-01-214-3616
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 020-950-284-04 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.529 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.167 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.188 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.375 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.529 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.167 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.188 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.373 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
5-16 6Upgraded Successor
successor cross-reference
successor
1JA7562H10Upgraded Successor
successor cross-reference
successor
CLN3-16Upgraded Successor
successor cross-reference
successor
2BC224Upgraded Successor
successor cross-reference
successor
73070Upgraded Successor
successor cross-reference
successor
3-16 4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 020-950-284-04?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 020-950-284-04?
020-950-284-04 is a CLAMP,LOOP.
What parts can replace 020-950-284-04?
There are 24 known substitutes for 020-950-284-04: 5-16 6, 1JA7562H10, CLN3-16 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 020-950-284-04?
020-950-284-04 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-214-3616. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 020-950-284-04

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026