PartsTable
Technical Data Sheet
Download PDF

020-7507 — CAMERA-RECORDING,VIDEO

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

020-7507: CAMERA-RECORDING,VIDEO.

The CAMERA-RECORDING,VIDEO is a the manufacturer cable assembly designed for reliable internal or external connectivity in enterprise server and storage environments. Key specifications include material: RUBBER, outside_diameter: 1.004 INCHES NOMINAL IN, special_features: (INAVY)VIDEO CAMERA, center_hole_diameter: 0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, end_item_identification: AN/UMK-4A(V)1, TESS/NITES 2002 SHIPS;AN/UMK-4A(V)1 UNIT 2, WORKSTATION ASSY 2 A. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-412-1166, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 020-7507
NSN: 5331-00-412-1166
NIINs: 004121166, 004391485, 015445463
FSC: 5331 — O-ring
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER
outside_diameter1.004 INCHES NOMINAL IN
special_features(INAVY)VIDEO CAMERA
center_hole_diameter0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identificationAN/UMK-4A(V)1, TESS/NITES 2002 SHIPS;AN/UMK-4A(V)1 UNIT 2, WORKSTATION ASSY 2 A
NSN5331-00-412-1166
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 020-7507 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.004 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.004 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.858 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
MATERIALRUBBER
SUBSTITUTES & CROSS-REFERENCES 3
23111-99-0338Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AS568B-020Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
PRP020C0MP7507Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 020-7507?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 020-7507?
020-7507 is a CAMERA-RECORDING,VIDEO. It is classified as a MRO (MRO_GENERAL).
What parts can replace 020-7507?
There are 3 known substitutes for 020-7507: 23111-99-0338, AS568B-020, PRP020C0MP7507. Substitute compatibility should be verified for your specific system.
What is the NSN for 020-7507?
020-7507 is cataloged in the U.S. Government catalog under NSN 5331-00-412-1166. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 020-7507

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.