PartsTable
Technical Data Sheet
Download PDF

02-86-2 — REMOVER,COLLAR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

02-86-2: REMOVER,COLLAR.

The REMOVER,COLLAR is a the manufacturer industrial component. This part is cataloged in the U.S. Government catalog under NSN 5305-01-340-6340, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02-86-2
NSN: 5305-01-340-6340
NIINs: 013406340, 015616775
FSC: 5305 — Screws
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
general_characteristics_item_descriptionHOLLOW MILL TYPE CUTTER; HIGH SPEED STEEL; FOR 5/32 IN. DIA PIN; 4 FLUTE; 1/4-28 UNF MALE THREADED SHANK; FOR REMOVING COLLAR FROM HI-SHEAR HS47 FASTENER IN
NSN5305-01-340-6340
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 02-86-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: NICKEL
•
FASTENER LENGTH: 0.437 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.375 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTNICKEL
FASTENER LENGTH0.437 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
THREAD LENGTH0.375 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 1
25635-013Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 02-86-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02-86-2?
02-86-2 is a REMOVER,COLLAR.
What parts can replace 02-86-2?
There is 1 known substitute for 02-86-2: 25635-013. Substitute compatibility should be verified for your specific system.
What is the NSN for 02-86-2?
02-86-2 is cataloged in the U.S. Government catalog under NSN 5305-01-340-6340. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02-86-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.