PartsTable
Technical Data Sheet
Download PDF

02-5021-011 — PRINTER,AUTOMATIC DATA PROCESSIN

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

02-5021-011: PRINTER,AUTOMATIC DATA PROCESSIN.

PRINTER,AUTOMATIC DATA PROCESSIN. Key specifications include material: PLASTIC POLYESTER OVERALL, overall_height: 0.783 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN, special_features: ONE SLOT .083 IN. WIDE .140 IN.

DEEP IN, style_designator: PLAIN, body_inside_diameter: 0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN, body_outside_diameter: 0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN. This part is cataloged in the U.S. Government catalog under NSN 4820-00-915-4636, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02-5021-011
NSN: 4820-00-915-4636
FSC: 4820 — Valves, Nonpowered
CAGE: 01343 — ANDERSON GREENWOOD LP DBA ANDERSON GREENWOOD CROSBY (USA)
SPECIFICATIONS
materialPLASTIC POLYESTER OVERALL
overall_height0.783 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN
special_featuresONE SLOT .083 IN. WIDE .140 IN. DEEP IN
style_designatorPLAIN
body_inside_diameter0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
body_outside_diameter0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
seating_surface_shapeFLAT
NSN4820-00-915-4636
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 02-5021-011 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY OUTSIDE DIAMETER: 0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: PLAIN
•
BODY INSIDE DIAMETER: 0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYESTER OVERALL
•
SEATING SURFACE SHAPE: FLAT
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.783 INCHES MINIMUM AND 0.792 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER0.845 INCHES MINIMUM AND 0.855 INCHES MAXIMUM IN
STYLE DESIGNATORPLAIN
BODY INSIDE DIAMETER0.375 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
SPECIAL FEATURESONE SLOT .083 IN. WIDE .140 IN. DEEP IN
MATERIALPLASTIC POLYESTER OVERALL
SEATING SURFACE SHAPEFLAT
SUBSTITUTES & CROSS-REFERENCES 1
2-5021-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 02-5021-011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02-5021-011?
02-5021-011 is a PRINTER,AUTOMATIC DATA PROCESSIN.
What parts can replace 02-5021-011?
There is 1 known substitute for 02-5021-011: 2-5021-8. Substitute compatibility should be verified for your specific system.
What is the NSN for 02-5021-011?
02-5021-011 is cataloged in the U.S. Government catalog under NSN 4820-00-915-4636. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02-5021-011