PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 02-14125
02-14125 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.062 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN, hole_diameter: 1.406 INCHES NOMINAL IN, surface_finish: 60.0 MICROINCHES TOP, overall_diameter: 2.240 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN, peripheral_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6259, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02-14125
NSN: 3110-00-155-6259
FSC: 3110
CAGE: 25681 — ITT GOULDS PUMPS, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.062 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
hole_diameter1.406 INCHES NOMINAL IN
surface_finish60.0 MICROINCHES TOP
overall_diameter2.240 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationMIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN3110-00-155-6259
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 02-14125 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 90.0 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: RADIAL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER90.0 MILLIMETERS NOMINAL MM
LOAD DIRECTIONRADIAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
SHIELD QUANTITY2
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODPRESSED
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
S072077885Interchangeable
interchangeable cross-reference
interchangeable
77510Interchangeable
interchangeable cross-reference
interchangeable
503477885Interchangeable
interchangeable cross-reference
interchangeable
19340-3AInterchangeable
interchangeable cross-reference
interchangeable
243273Interchangeable
interchangeable cross-reference
interchangeable
4010-304-022Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02-14125?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02-14125?
02-14125 is a BEARING,BALL,ANNULAR.
What parts can replace 02-14125?
There are 29 known substitutes for 02-14125: S072077885, 77510, 503477885 and 26 more. Substitute compatibility should be verified for your specific system.
Is 02-14125 still available?
02-14125 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02-14125

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026