PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 02-0775-20
02-0775-20 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C OVERALL, bore_shape: STRAIGHT, bore_diameter: 40.00 MILLIMETERS NOMINAL MM, overall_width: 1.1875 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1279, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02-0775-20
NSN: 3110-00-156-1279
FSC: 3110
CAGE: 49524 — SCOTSMAN INDUSTRIES INC DIV SCOTSMAN ICE SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP 440C OVERALL
bore_shapeSTRAIGHT
bore_diameter40.00 MILLIMETERS NOMINAL MM
overall_width1.1875 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
shield_quantity2
style_designatorLOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter80.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-156-1279
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 02-0775-20 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: INWARD CONVERGENT
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 440C OVERALL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 440C OVERALL
INTERNAL FIT-UP DESIGNATIONSTANDARD
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH1.1875 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
SHIELD QUANTITY2
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
277-5Interchangeable
interchangeable cross-reference
interchangeable
128054AInterchangeable
interchangeable cross-reference
interchangeable
114026Interchangeable
interchangeable cross-reference
interchangeable
L648REV3Interchangeable
interchangeable cross-reference
interchangeable
WG00656Interchangeable
interchangeable cross-reference
interchangeable
47004Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02-0775-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02-0775-20?
02-0775-20 is a BEARING,BALL,ANNULAR.
What parts can replace 02-0775-20?
There are 15 known substitutes for 02-0775-20: 277-5, 128054A, 114026 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 02-0775-20?
02-0775-20 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1279. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02-0775-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026