PartsTable
Technical Data Sheet
Download PDF

02-035086 ITEM 17 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

02-035086 ITEM 17: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: FLAT CHAMFER, head_height: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-250-4643, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02-035086 ITEM 17
NSN: 5305-01-250-4643
FSC: 5305 — Screws
CAGE: 78062 — SARGENT AEROSPACE & DEFENSE, LLC DBA SARGENT CONTROLS & AEROSPACE DIV SARGENT CONTROLS & AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleFLAT CHAMFER
head_height0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
hole_diameter0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
hole_quantity6
thread_length5.195 INCHES MINIMUM AND 5.375 INCHES MAXIMUM IN
fastener_length5.295 INCHES MINIMUM AND 5.375 INCHES MAXIMUM IN
hardness_rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
NSN5305-01-250-4643
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 02-035086 ITEM 17 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
FASTENER LENGTH: 5.295 INCHES MINIMUM AND 5.375 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 5.195 INCHES MINIMUM AND 5.375 INCHES MAXIMUM IN
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
HOLE CONFIGURATION STYLE: ROUND INTERNAL HEXAGON
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.375 INCHES NOMINAL IN
HEAD HEIGHT0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
FASTENER LENGTH5.295 INCHES MINIMUM AND 5.375 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH5.195 INCHES MINIMUM AND 5.375 INCHES MAXIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HOLE CONFIGURATION STYLEROUND INTERNAL HEXAGON
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
02-035086Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
20420-004 ITEM 17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NAS1351-8H86PReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 02-035086 ITEM 17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02-035086 ITEM 17?
02-035086 ITEM 17 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 02-035086 ITEM 17?
There are 3 known substitutes for 02-035086 ITEM 17: 02-035086, 20420-004 ITEM 17, NAS1351-8H86P. Substitute compatibility should be verified for your specific system.
What is the NSN for 02-035086 ITEM 17?
02-035086 ITEM 17 is cataloged in the U.S. Government catalog under NSN 5305-01-250-4643. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02-035086 ITEM 17

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.