PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 02-02105
02-02105 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 430 OVERALL, recess_angle: 90.0 DEGREES NOMINAL, hole_diameter: 0.376 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN, recess_diameter: 0.401 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN, outside_diameter: 2.344 INCHES NOMINAL IN, style_designator: RECESSED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-440-9265, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02-02105
NSN: 5310-00-440-9265
FSC: 5310
CAGE: 94830 — PELLERIN MILNOR CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 430 OVERALL
recess_angle90.0 DEGREES NOMINAL
hole_diameter0.376 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
recess_diameter0.401 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
outside_diameter2.344 INCHES NOMINAL IN
style_designatorRECESSED
material_thickness0.135 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-440-9265
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 02-02105 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 430 OVERALL
•
MATERIAL THICKNESS: 0.135 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.344 INCHES NOMINAL IN
•
RECESS DIAMETER: 0.401 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.376 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: RECESSED
•
RECESS ANGLE: 90.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 430 OVERALL
MATERIAL THICKNESS0.135 INCHES NOMINAL IN
OUTSIDE DIAMETER2.344 INCHES NOMINAL IN
RECESS DIAMETER0.401 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
HOLE DIAMETER0.376 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORRECESSED
RECESS ANGLE90.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
615721Interchangeable
interchangeable cross-reference
interchangeable
VG95236-T103Interchangeable
interchangeable cross-reference
interchangeable
K3Interchangeable
interchangeable cross-reference
interchangeable
ST5M1272-002Interchangeable
interchangeable cross-reference
interchangeable
CXT3837Interchangeable
interchangeable cross-reference
interchangeable
2210-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02-02105?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02-02105?
02-02105 is a WASHER,RECESSED.
What parts can replace 02-02105?
There are 13 known substitutes for 02-02105: 615721, VG95236-T103, K3 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 02-02105?
02-02105 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-440-9265. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02-02105

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026