PartsTable
Technical Data Sheet
Download PDF

02-014012-008 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

02-014012-008: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, temp_rating: -55.0 CELSIUS AND 200.0 CELSIUS DEGC, hole_diameter: 0.147 INCHES MINIMUM AND 0.157 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.695 INCHES MINIMUM AND 1.711 INCHES MAXIMUM IN, overall_length: 1.695 INCHES MINIMUM AND 1.711 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-204-4730, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02-014012-008
NSN: 5330-01-204-4730
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
temp_rating-55.0 CELSIUS AND 200.0 CELSIUS DEGC
hole_diameter0.147 INCHES MINIMUM AND 0.157 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.695 INCHES MINIMUM AND 1.711 INCHES MAXIMUM IN
overall_length1.695 INCHES MINIMUM AND 1.711 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
aperture_diameter1.555 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
bolt_hole_quantity4
outside_corner_radius0.120 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
cross-sectional_thickness0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-204-4730
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 02-014012-008 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -55.0 CELSIUS AND 200.0 CELSIUS DEGC
•
CROSS-SECTIONAL THICKNESS: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.555 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
TEMP RATING-55.0 CELSIUS AND 200.0 CELSIUS DEGC
CROSS-SECTIONAL THICKNESS0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH1.695 INCHES MINIMUM AND 1.711 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.695 INCHES MINIMUM AND 1.711 INCHES MAXIMUM IN
APERTURE DIAMETER1.555 INCHES MINIMUM AND 1.570 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 2
SAE-AS90484Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS90484-24-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 02-014012-008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02-014012-008?
02-014012-008 is a GASKET.
What parts can replace 02-014012-008?
There are 2 known substitutes for 02-014012-008: SAE-AS90484, MS90484-24-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 02-014012-008?
02-014012-008 is cataloged in the U.S. Government catalog under NSN 5330-01-204-4730. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02-014012-008

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.