PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 02-0067-8-23
02-0067-8-23 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,INTERNAL WRENCHING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL, head_style: BEVEL-CONICAL, head_height: 0.500 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN, thread_length: 0.787 INCHES MINIMUM AND 0.837 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-722-4876, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02-0067-8-23
NSN: 5306-00-722-4876
FSC: 5306
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
head_styleBEVEL-CONICAL
head_height0.500 INCHES NOMINAL IN
thread_class3A A
head_diameter0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
thread_length0.787 INCHES MINIMUM AND 0.837 INCHES MAXIMUM IN
fastener_length1.423 INCHES MINIMUM AND 1.453 INCHES MAXIMUM IN
hardness_rating34.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5306-00-722-4876
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 02-0067-8-23 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD LENGTH: 0.787 INCHES MINIMUM AND 0.837 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
•
HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
THREAD SERIES DESIGNATOR: UNF
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.787 INCHES MINIMUM AND 0.837 INCHES MAXIMUM IN
HEAD DIAMETER0.818 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
HARDNESS RATING34.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.500 INCHES IN
THREAD SERIES DESIGNATORUNF
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
02-0067-8-83Upgraded Successor
successor cross-reference
successor
21376 FIND 23Upgraded Successor
successor cross-reference
successor
02-0067Upgraded Successor
successor cross-reference
successor
23100 FIND NO 33Upgraded Successor
successor cross-reference
successor
02-0067-7-22Upgraded Successor
successor cross-reference
successor
23100Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02-0067-8-23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02-0067-8-23?
02-0067-8-23 is a BOLT,INTERNAL WRENCHING.
What parts can replace 02-0067-8-23?
There are 23 known substitutes for 02-0067-8-23: 02-0067-8-83, 21376 FIND 23, 02-0067 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 02-0067-8-23?
02-0067-8-23 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-722-4876. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02-0067-8-23

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026