PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 01T7083A
01T7083A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, peripheral_diameter: 1.088 INCHES MINIMUM AND 1.098 INCHES MAXIMUM IN, center_hole_diameter: 0.779 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN, cross-sectional_height: 0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-517-5480, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
01T7083A
NSN: 5330-00-517-5480
FSC: 5330
CAGE: 57526 — FORD MOTOR COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
peripheral_diameter1.088 INCHES MINIMUM AND 1.098 INCHES MAXIMUM IN
center_hole_diameter0.779 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
cross-sectional_height0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
cross-sectional_shape_styleU
NSN5330-00-517-5480
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 01T7083A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: U
•
CENTER HOLE DIAMETER: 0.779 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.088 INCHES MINIMUM AND 1.098 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEU
CENTER HOLE DIAMETER0.779 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.088 INCHES MINIMUM AND 1.098 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
409856PC14SH2Interchangeable
interchangeable cross-reference
interchangeable
41525PC14SH7Interchangeable
interchangeable cross-reference
interchangeable
415-2100-71686PC5Interchangeable
interchangeable cross-reference
interchangeable
2040H25Interchangeable
interchangeable cross-reference
interchangeable
37619Interchangeable
interchangeable cross-reference
interchangeable
JT467AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01T7083A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01T7083A?
01T7083A is a RETAINER,PACKING.
What parts can replace 01T7083A?
There are 15 known substitutes for 01T7083A: 409856PC14SH2, 41525PC14SH7, 415-2100-71686PC5 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 01T7083A?
01T7083A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-517-5480. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01T7083A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026