PartsTable
Technical Data Sheet
PartsTable / O-RING / 01932
01932 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, thickness: 0.144 INCHES NOMINAL IN, hole_diameter: 1.0625 INCHES NOMINAL IN, overall_diameter: 2.250 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-726-0797, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
01932
NSN: 5331-00-726-0797
FSC: 5331 — O-RING
CAGE: 76385 — MINOR RUBBER CO INC (USA)
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
thickness0.144 INCHES NOMINAL IN
hole_diameter1.0625 INCHES NOMINAL IN
overall_diameter2.250 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5331-00-726-0797
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 01932 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 3.460 INCHES MINIMUM AND 3.508 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 3.762 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER3.460 INCHES MINIMUM AND 3.508 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER3.762 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
AS568-238Interchangeable
interchangeable cross-reference
interchangeable
58094Interchangeable
interchangeable cross-reference
interchangeable
D2000-05 2BG715E034EF11EF21F1Interchangeable
interchangeable cross-reference
interchangeable
059209Interchangeable
interchangeable cross-reference
interchangeable
11012-28Interchangeable
interchangeable cross-reference
interchangeable
01932Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01932?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01932?
01932 is a O-RING.
What parts can replace 01932?
There are 8 known substitutes for 01932: AS568-238, 58094, D2000-05 2BG715E034EF11EF21F1 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 01932?
01932 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-726-0797. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01932

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026