PartsTable
Technical Data Sheet
01885 ✓ Verified by PartsTable
Displex · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Real Glass (2D) with EASY-ON® Eco Mounting Frame<br> <br>Tempered glass with rounded edges<br>All Displex protective glasses have a surface hardness of 10H and are therefore not only more scratch-, break- and shock-resistant than comparable brand products, but even surpass sapphire glass, which is used in luxury watches and has a hardness of 9H.<br>Even the edges, the area of the smartphone and protective glass most susceptible to breakage and impact, are specially hardened, rounded by 4-fold polishing and finished with a shock-absorbing edge. This elaborate production process further increases the protection against knocks and bumps and allows a particularly pleasant use of the smartphone. With these features, the protective glass is extremely resistant and guarantees maximum breakage resistance.<br> <br>Case-friendly<br>Our Displex protective glass is manufactured to within 5/100 mm of the smartphone contours and therefore fits perfectly on your smartphone.

In addition, the protectiv This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-341-6685, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 01885
NSN: 5315-00-341-6685
FSC: 5315
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialPLASTIC POLYPROPYLENE OVERALL
surface_finish32.0 MICROINCHES OUTSIDE DIAMETER
connection_typeUNTHREADED INTERNAL TUBE FIRST END
first_end_styleSQUARE
connection_styleGRIPPING (HOSE) FIRST END
style_designatorCENTER WRENCHING FACILITY
operating_pressure200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
pin_overall_length0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
nominal_thread_size0.750 INCHES SECOND END IN
pin_overall_diameter0.0319 INCHES MINIMUM AND 0.0325 INCHES MAXIMUM IN
maximum_operating_temp212.0 FAHRENHEIT SINGLE RESPONSE DEGF
nominal_overall_length1.890 INCHES IN
NSN5315-00-341-6685
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 01885 · Displex ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SURFACE FINISH: 32.0 MICROINCHES OUTSIDE DIAMETER
PIN OVERALL LENGTH: 0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
PIN OVERALL DIAMETER: 0.0319 INCHES MINIMUM AND 0.0325 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 OND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL: STEEL COMP 316 OVERALL
FIRST END STYLE: SQUARE
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER
PIN OVERALL LENGTH0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
PIN OVERALL DIAMETER0.0319 INCHES MINIMUM AND 0.0325 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 OND B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 316 OVERALL
FIRST END STYLESQUARE
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
5310PL0125508Interchangeable
interchangeable cross-reference
interchangeable
925000-0804Interchangeable
interchangeable cross-reference
interchangeable
36038-3408Interchangeable
interchangeable cross-reference
interchangeable
A21-1885AInterchangeable
interchangeable cross-reference
interchangeable
01885Interchangeable
interchangeable cross-reference
interchangeable
EDG-0188-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01885?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01885?
01885 is a CLAMP,BACK PLATE manufactured by Displex. It is classified as a MRO (MRO_GENERAL).
What parts can replace 01885?
There are 9 known substitutes for 01885: 5310PL0125508, 925000-0804, 36038-3408 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 01885?
01885 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-341-6685. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01885