PartsTable
Technical Data Sheet
PartsTable / O-RING / 018-7799
018-7799 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONTROL ASSEMBLY,PUSH-PULL is a the manufacturer industrial component. Key specifications include core_diameter: 0.094 INCHES NOMINAL IN, core_material: STEEL CORROSION RESISTING, travel_distance: 3.000 INCHES NOMINAL IN, effective_length: 480.000 INCHES NOMINAL IN, core_construction: SINGLE WIRE, features_provided: ROTARY ADJUSTMENT PROVISION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-092-5503, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
018-7799
NSN: 5331-01-092-5503
FSC: 5331 — O-RING
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
core_diameter0.094 INCHES NOMINAL IN
core_materialSTEEL CORROSION RESISTING
travel_distance3.000 INCHES NOMINAL IN
effective_length480.000 INCHES NOMINAL IN
core_constructionSINGLE WIRE
features_providedROTARY ADJUSTMENT PROVISION
flexible_conduit_materialPLASTIC
flexible_conduit_outside_diameter0.340 INCHES NOMINAL IN
core_processed_end_connection_typeADJUSTABLE THREADED ADAPTER
NSN5331-01-092-5503
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 018-7799 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 1.70 MILLIMETERS MINIMUM AND 1.86 MILLIMETERS MAXIMUM MM
•
OUTSIDE DIAMETER: 0.864 INCHES MINIMUM AND 0.894 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -65.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 18.54 MILLIMETERS MINIMUM AND 19.00 MILLIMETERS MAXIMUM MM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT1.70 MILLIMETERS MINIMUM AND 1.86 MILLIMETERS MAXIMUM MM
OUTSIDE DIAMETER0.864 INCHES MINIMUM AND 0.894 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
TEMP RATING-65.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER18.54 MILLIMETERS MINIMUM AND 19.00 MILLIMETERS MAXIMUM MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
8018Interchangeable
interchangeable cross-reference
interchangeable
127-189-018Interchangeable
interchangeable cross-reference
interchangeable
GD00990186Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-018Interchangeable
interchangeable cross-reference
interchangeable
ASC1442296Interchangeable
interchangeable cross-reference
interchangeable
M83248-1-018Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 018-7799?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 018-7799?
018-7799 is a CONTROL ASSEMBLY,PUSH-PULL.
What parts can replace 018-7799?
There are 24 known substitutes for 018-7799: 8018, 127-189-018, GD00990186 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 018-7799?
018-7799 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-092-5503. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 018-7799

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026