PartsTable
Technical Data Sheet
01752 ✓ Verified by PartsTable
Displex · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Real Glass (2D) with EASY-ON® Eco Mounting Frame<br> <br>Tempered glass with rounded edges<br>All Displex protective glasses have a surface hardness of 10H and are therefore not only more scratch-, break- and shock-resistant than comparable brand products, but even surpass sapphire glass, which is used in luxury watches and has a hardness of 9H.<br>Even the edges, the area of the smartphone and protective glass most susceptible to breakage and impact, are specially hardened, rounded by 4-fold polishing and finished with a shock-absorbing edge. This elaborate production process further increases the protection against knocks and bumps and allows a particularly pleasant use of the smartphone. With these features, the protective glass is extremely resistant and guarantees maximum breakage resistance.<br> <br>Case-friendly<br>Our Displex protective glass is manufactured to within 5/100 mm of the smartphone contours and therefore fits perfectly on your smartphone.

In addition, the protectiv This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-251-2875, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
01752
NSN: 5330-01-251-2875
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part Number01752
ManufacturerDisplex
NSN5330-01-251-2875
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 01752 MFR: Displex ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
92010Interchangeable
interchangeable cross-reference
interchangeable
4KM25Interchangeable
interchangeable cross-reference
interchangeable
392Interchangeable
interchangeable cross-reference
interchangeable
4820PL0633173Interchangeable
interchangeable cross-reference
interchangeable
X205SInterchangeable
interchangeable cross-reference
interchangeable
63795CXInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01752?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01752?
01752 is a GASKET manufactured by Displex.
What parts can replace 01752?
There are 9 known substitutes for 01752: 92010, 4KM25, 392 and 6 more. Substitute compatibility should be verified for your specific system.
Is 01752 still available?
01752 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01752