PartsTable
Technical Data Sheet
PartsTable / MRO / 01642
01642 ✓ Verified by PartsTable
Displex · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Smart Glass (9H), unbreakable, ultra-thin, invisible, with EASY-ON® Stickers<br> <br>DISPLEX Smart Glass is a combination of conventional protective glass and extremely thin, flexible, virtually indestructible protective film. With a surface hardness of 9H, it offers very good protection against scratches and other damage. At the same time, with 0.25mm, it is ultra-thin, resistant, flexible or bendable and therefore almost indestructible.

The DISPLEX Smart Glass is manufactured with the latest laser technology in our production facility in Straubing, Germany, and is precisely adapted to the contour of the smartphone display - Made in Germany. The unrestricted functionality, colour brilliance and case compatibility are of course guaranteed.<br> <br>Case-friendly<br>Our Displex protective glass is manufactured to within 5/100 mm of the smartphone contours and therefore fits perfectly on your smartphone. In addition, the protective film is ultra-thin at 3mm.

This means that all standard-s This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-150-4131, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 01642
NSN: 5310-00-150-4131
FSC: 5310
CAGE: 06424 — ALLIANT TECHSYSTEMS OPERATIONS LLC DIV DEFENSE ELECTRONIC SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 BALL
bore_shapeSTRAIGHT
bore_diameter4.0 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
hole_diameter0.075 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
overall_width5.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
hardness_rating35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
outside_diameter0.136 INCHES MAXIMUM IN
style_designatorSHOULDERED INNER RING, SEPARABLE
surface_treatmentPASSIVATE OVERALL
NSN5310-00-150-4131
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 01642 · Displex ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
•
OUTSIDE DIAMETER: 0.136 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.075 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
MATERIAL THICKNESS: 0.022 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPASSIVATE OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
OUTSIDE DIAMETER0.136 INCHES MAXIMUM IN
HOLE DIAMETER0.075 INCHES MINIMUM AND 0.084 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
MATERIAL THICKNESS0.022 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
01642Interchangeable
interchangeable cross-reference
interchangeable
34BX4C44Interchangeable
interchangeable cross-reference
interchangeable
34BX4C44V11G2Interchangeable
interchangeable cross-reference
interchangeable
6515NCM030425Interchangeable
interchangeable cross-reference
interchangeable
04-0041Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01642?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01642?
01642 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by Displex. It is classified as a MRO (MRO_GENERAL).
What parts can replace 01642?
There are 5 known substitutes for 01642: 01642, 34BX4C44, 34BX4C44V11G2 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 01642?
01642 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-150-4131. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01642

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026