PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0164-12
0164-12 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 AND STEEL COMP 420 OVERALL, hole_diameter: 0.318 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN, hardness_rating: 35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OR 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.586 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-042-6759, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0164-12
NSN: 5310-00-042-6759
FSC: 5310
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialSTEEL COMP 302 AND STEEL COMP 420 OVERALL
hole_diameter0.318 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
hardness_rating35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OR 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.586 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentPASSIVATE OVERALL
material_thickness0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
nondefinitive_spec/std_data2 STYLE AND C CLASS
material_document_and_classificationFED STD 66,AISI 302 OR SAE 30302 FED STD 1ST MATERIAL RESPONSE AND FED STD 66,AISI 420 OR SAE 51420 FED STD 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-042-6759
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0164-12 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,AISI 302 OR SAE 30302 FED STD 1ST MATERIAL RESPONSE AND FED STD 66,AISI 420 OR SAE 51420 FED STD 2ND MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 302 AND STEEL COMP 420 OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
NONDEFINITIVE SPEC/STD DATA: 2 STYLE AND C CLASS
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.586 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66,AISI 302 OR SAE 30302 FED STD 1ST MATERIAL RESPONSE AND FED STD 66,AISI 420 OR SAE 51420 FED STD 2ND MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 302 AND STEEL COMP 420 OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
NONDEFINITIVE SPEC/STD DATA2 STYLE AND C CLASS
SURFACE TREATMENTPASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL THICKNESS0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.586 INCHES MAXIMUM IN
HOLE DIAMETER0.318 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OR 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
1187Interchangeable
interchangeable cross-reference
interchangeable
3407X1AInterchangeable
interchangeable cross-reference
interchangeable
6407JInterchangeable
interchangeable cross-reference
interchangeable
949-829P26TInterchangeable
interchangeable cross-reference
interchangeable
69020C1Interchangeable
interchangeable cross-reference
interchangeable
A1025Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0164-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0164-12?
0164-12 is a WASHER,LOCK.
What parts can replace 0164-12?
There are 22 known substitutes for 0164-12: 1187, 3407X1A, 6407J and 19 more. Substitute compatibility should be verified for your specific system.
Is 0164-12 still available?
0164-12 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0164-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026