PartsTable
Technical Data Sheet
Download PDF

0161814-0001-0001 — SEAT,VALVE

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

0161814-0001-0001: SEAT,VALVE.

The SEAT,VALVE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, flange_diameter: 2.427 INCHES MINIMUM AND 2.432 INCHES MAXIMUM IN, special_features: 7.5 DEG ANGLE FACE OPPOSITE SEAT, style_designator: PLAIN FLANGED, seat_angle_in_deg: 34.000 MINIMUM AND 35.000 MAXIMUM, under_flange_height: 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4820-00-226-5763, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0161814-0001-0001
NSN: 4820-00-226-5763
NIINs: 002265763, 010319542
FSC: 4820 — Valves, Nonpowered
CAGE: 35795 — LESLIE CONTROLS, INC. DBA LESLIE CONTROLS INC (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
flange_diameter2.427 INCHES MINIMUM AND 2.432 INCHES MAXIMUM IN
special_features7.5 DEG ANGLE FACE OPPOSITE SEAT
style_designatorPLAIN FLANGED
seat_angle_in_deg34.000 MINIMUM AND 35.000 MAXIMUM
under_flange_height0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
body_inside_diameter1.000 INCHES NOMINAL IN
body_outside_diameter2.177 INCHES MINIMUM AND 2.182 INCHES MAXIMUM IN
seating_surface_shapeANGULAR
flange_seat_to_disk_end_height0.155 INCHES NOMINAL IN
NSN4820-00-226-5763
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 0161814-0001-0001 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE SEAT TO DISK END HEIGHT: 0.155 INCHES NOMINAL IN
•
FLANGE DIAMETER: 2.427 INCHES MINIMUM AND 2.432 INCHES MAXIMUM IN
•
BODY OUTSIDE DIAMETER: 2.177 INCHES MINIMUM AND 2.182 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: PLAIN FLANGED
•
BODY INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
UNDER FLANGE HEIGHT: 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS
FLANGE SEAT TO DISK END HEIGHT0.155 INCHES NOMINAL IN
FLANGE DIAMETER2.427 INCHES MINIMUM AND 2.432 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER2.177 INCHES MINIMUM AND 2.182 INCHES MAXIMUM IN
STYLE DESIGNATORPLAIN FLANGED
BODY INSIDE DIAMETER1.000 INCHES NOMINAL IN
SPECIAL FEATURES7.5 DEG ANGLE FACE OPPOSITE SEAT
UNDER FLANGE HEIGHT0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
SEAT ANGLE IN DEG34.000 MINIMUM AND 35.000 MAXIMUM
SEATING SURFACE SHAPEANGULAR
SUBSTITUTES & CROSS-REFERENCES 2
298-00-09PC15Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
618-14-01Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0161814-0001-0001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0161814-0001-0001?
0161814-0001-0001 is a SEAT,VALVE.
What parts can replace 0161814-0001-0001?
There are 2 known substitutes for 0161814-0001-0001: 298-00-09PC15, 618-14-01. Substitute compatibility should be verified for your specific system.
What is the NSN for 0161814-0001-0001?
0161814-0001-0001 is cataloged in the U.S. Government catalog under NSN 4820-00-226-5763. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0161814-0001-0001