PartsTable
Technical Data Sheet
015-1283-00 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SNAP HOOK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BLADE, design_type: FIXED, end_position: CONNECTION END IN SAME PLANE AS HOOK END, inside_width: 0.656 INCHES NOMINAL IN, inside_length: 0.656 INCHES NOMINAL IN, overall_length: 3.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-322-5145, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
015-1283-00
NSN: 5340-01-322-5145
FSC: 5340
CAGE: 95105 — ROCKWELL COLLINS, INC. DIV COLLINS AEROSPACE - MISSION SYSTEMS (USA)
SPECIFICATIONS
materialCOPPER ALLOY BLADE
design_typeFIXED
end_positionCONNECTION END IN SAME PLANE AS HOOK END
inside_width0.656 INCHES NOMINAL IN
inside_length0.656 INCHES NOMINAL IN
overall_length3.188 INCHES NOMINAL IN
unattached_ringNOT INCLUDED
end_connection_styleEYE
hook_style_designatorSPRING BLADE
rubber_covered_featureNOT INCLUDED
end_item_identificationW/S:COMMAND CONSOLE, AN/ASC-15B
NSN5340-01-322-5145
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 015-1283-00 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
INSIDE WIDTH: 0.656 INCHES NOMINAL IN
MATERIAL: COPPER ALLOY HOOK
UNATTACHED RING: NOT INCLUDED
HOOK STYLE DESIGNATOR: SPRING BLADE
RUBBER COVERED FEATURE: NOT INCLUDED
END POSITION: CONNECTION END IN SAME PLANE AS HOOK END
DESIGN TYPE: FIXED
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE WIDTH0.656 INCHES NOMINAL IN
MATERIALCOPPER ALLOY HOOK
MATERIALCOPPER ALLOY BLADE
UNATTACHED RINGNOT INCLUDED
HOOK STYLE DESIGNATORSPRING BLADE
RUBBER COVERED FEATURENOT INCLUDED
END POSITIONCONNECTION END IN SAME PLANE AS HOOK END
DESIGN TYPEFIXED
OVERALL LENGTH3.188 INCHES NOMINAL IN
END CONNECTION STYLEEYE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
5308Interchangeable
interchangeable cross-reference
interchangeable
273351Interchangeable
interchangeable cross-reference
interchangeable
722688Interchangeable
interchangeable cross-reference
interchangeable
02082558Interchangeable
interchangeable cross-reference
interchangeable
208CFFInterchangeable
interchangeable cross-reference
interchangeable
43208PPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 015-1283-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 015-1283-00?
015-1283-00 is a SNAP HOOK.
What parts can replace 015-1283-00?
There are 21 known substitutes for 015-1283-00: 5308, 273351, 722688 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 015-1283-00?
015-1283-00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-322-5145. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 015-1283-00