PartsTable
Technical Data Sheet
Download PDF

015-0343-001 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

015-0343-001: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 3003, first_leg_style: CORNER RADIUS, first_leg_length: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM IN, style_designator: ADJACENT ANGLES, second_leg_length: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM IN, surface_treatment: ANODIZE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-262-4160, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
015-0343-001
NSN: 5340-01-262-4160
FSC: 5340 — Hardware, Commercial
CAGE: 71468 — ITT CANNON LLC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 3003
first_leg_styleCORNER RADIUS
first_leg_length1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM IN
style_designatorADJACENT ANGLES
second_leg_length1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM IN
surface_treatmentANODIZE
mounting_hole_typePLAIN
first_leg_thickness0.063 INCHES NOMINAL IN
second_leg_thickness0.063 INCHES NOMINAL IN
center_section_height1.675 INCHES MINIMUM AND 1.705 INCHES MAXIMUM IN
end_item_identificationSACDIN MAINTENANCE
first_leg_hole_diameter0.093 INCHES NOMINAL IN
NSN5340-01-262-4160
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 015-0343-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.102 INCHES MINIMUM AND 0.117 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.093 INCHES NOMINAL IN
•
CENTER SECTION THICKNESS: 0.063 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.375 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
•
SECOND LEG LENGTH: 1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: FOUR HOLES
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.102 INCHES MINIMUM AND 0.117 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.093 INCHES NOMINAL IN
CENTER SECTION THICKNESS0.063 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.375 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
SECOND LEG LENGTH1.141 INCHES MINIMUM AND 1.171 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLEFOUR HOLES
STYLE DESIGNATORADJACENT ANGLES
FIRST LEG STYLECORNER RADIUS
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
1134663G2Reference document
Same NSN cross-reference
Reference document — Secondary reference
1134663G1Reference document
Same NSN cross-reference
Reference document — Secondary reference
015-0344-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 015-0343-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 015-0343-001?
015-0343-001 is a BRACKET,DOUBLE ANGLE.
What parts can replace 015-0343-001?
There are 3 known substitutes for 015-0343-001: 1134663G2, 1134663G1, 015-0344-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 015-0343-001?
015-0343-001 is cataloged in the U.S. Government catalog under NSN 5340-01-262-4160. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 015-0343-001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.