PartsTable
Technical Data Sheet
Download PDF

01467 — BEARING,SLEEVE

✓ Government record, cited
Displex · BALL BEARING
PRODUCT OVERVIEW

01467: BEARING,SLEEVE.

Real Glass (2D) with EASY-ON® Eco Mounting Frame Tempered glass with rounded edges All Displex protective glasses have a surface hardness of 10H and are therefore not only more scratch-, break- and shock-resistant than comparable brand products, but even surpass sapphire glass, which is used in luxury watches and has a hardness of 9H. Even the edges, the area of the smartphone and protective glass most susceptible to breakage and impact, are specially hardened, rounded by 4-fold polishing and finished with a shock-absorbing edge. This elaborate production process further increases the protection against knocks and bumps and allows a particularly pleasant use of the smartphone.

With these features, the protective glass is extremely resistant and guarantees maximum breakage resistance. Case-friendly Our Displex protective glass is manufactured to within 5/100 mm of the smartphone contours and therefore fits perfectly on your smartphone. In addition, the protectiv This part is cataloged in the U.S.

Government catalog under NSN 3120-00-305-5387, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
01467
NSN: 3120-00-305-5387
NIINs: 003055387, 013893261
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 45934 — ONTIC ENGINEERING & MANUFACTURING, INC DBA ONTIC US (USA)
SPECIFICATIONS
special_features0.375 IN. ORIFICE X 2.062 IN. IN
end_item_identificationSILVERADO SUCTION BLAST CABINETS
NSN3120-00-305-5387
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 01467 · Displex ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 20.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
•
CORNER SHAPE: SQUARE ALL CORNERS
•
FLANGE OUTSIDE DIAMETER: 1.2490 INCHES MINIMUM AND 1.2495 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH20.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH100.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH100.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH40.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH100.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH8.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
CORNER SHAPESQUARE ALL CORNERS
FLANGE OUTSIDE DIAMETER1.2490 INCHES MINIMUM AND 1.2495 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER0.6850 INCHES MINIMUM AND 0.6855 INCHES MAXIMUM IN
OVERALL LENGTH0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 01467?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01467?
01467 is a BEARING,SLEEVE manufactured by Displex.
What is the NSN for 01467?
01467 is cataloged in the U.S. Government catalog under NSN 3120-00-305-5387. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01467