PartsTable
Technical Data Sheet
Download PDF

01456 — WASHER,FLAT

✓ Government record, cited
Displex · NUT WASHER
PRODUCT OVERVIEW

01456: WASHER,FLAT.

Real Glass (2D) with EASY-ON® Sticker Tempered glass with rounded edges All Displex protective glasses have a surface hardness of 10H and are therefore not only more scratch-, break- and shock-resistant than comparable brand products, but even surpass sapphire glass, which is used in luxury watches and has a hardness of 9H. Even the edges, the area of the smartphone and protective glass most susceptible to breakage and impact, are specially hardened, rounded by 4-fold polishing and finished with a shock-absorbing edge. This elaborate production process further increases the protection against knocks and bumps and allows a particularly pleasant use of the smartphone.

With these features, the protective glass is extremely resistant and guarantees maximum breakage resistance. Case-friendly Our Displex protective glass is manufactured to within 5/100 mm of the smartphone contours and therefore fits perfectly on your Galaxy S7 edge. In addition, the protective film is This part is cataloged in the U.S.

Government catalog under NSN 5310-00-878-5697, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
01456
NSN: 5310-00-878-5697
FSC: 5310 — Nuts and Washers
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
thickness0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
hole_diameter0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
overall_diameter0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
surface_treatmentCHROMATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-A-250/4,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-878-5697
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 01456 · Displex ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/4,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CHROMATE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCHROMATE OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALALUMINUM ALLOY 2024 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
THICKNESS0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 01456?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01456?
01456 is a WASHER,FLAT manufactured by Displex.
What is the NSN for 01456?
01456 is cataloged in the U.S. Government catalog under NSN 5310-00-878-5697. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01456