01433: GENERATOR,ENGINE ACCESSORY.
Real Glass (2D) with EASY-ON® Eco Mounting Frame Tempered glass with rounded edges All Displex protective glasses have a surface hardness of 10H and are therefore not only more scratch-, break- and shock-resistant than comparable brand products, but even surpass sapphire glass, which is used in luxury watches and has a hardness of 9H. Even the edges, the area of the smartphone and protective glass most susceptible to breakage and impact, are specially hardened, rounded by 4-fold polishing and finished with a shock-absorbing edge. This elaborate production process further increases the protection against knocks and bumps and allows a particularly pleasant use of the smartphone.
With these features, the protective glass is extremely resistant and guarantees maximum breakage resistance. Case-friendly Our Displex protective glass is manufactured to within 5/100 mm of the smartphone contours and therefore fits perfectly on your smartphone. In addition, the protectiv This part is cataloged in the U.S.
Government catalog under NSN 3110-00-227-4282, indicating validated use in U.S. government and defense logistics supply chains.
| material | STEEL CORROSION RESISTING BALL |
| bore_shape | STRAIGHT |
| bore_diameter | 3.3455 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN |
| overall_width | 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN |
| load_direction | RADIAL |
| surface_finish | GROUND |
| special_features | INNER AND OUTER RING RUNOUT 0.0005 IN. IN |
| style_designator | NON-LOADING GROOVE, NON-SEPARABLE |
| overall_outside_diameter | 4.1329 INCHES MINIMUM AND 4.1339 INCHES MAXIMUM IN |
| internal_fit-up_designation | STANDARD |
| retainer_fabrication_method | MACHINED |
| NSN | 3110-00-227-4282 |
| RETAINER FABRICATION METHOD | MACHINED |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| SURFACE FINISH | GROUND |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| OVERALL WIDTH | 0.2760 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN |
| OVERALL OUTSIDE DIAMETER | 4.1329 INCHES MINIMUM AND 4.1339 INCHES MAXIMUM IN |
| BORE SHAPE | STRAIGHT |
| LOAD DIRECTION | RADIAL |
| SPECIAL FEATURES | INNER AND OUTER RING RUNOUT 0.0005 IN. IN |
| BORE DIAMETER | 3.3455 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN |