Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
Real Glass (2D) with EASY-ON® Sticker<br><br>Tempered glass with rounded edges<br>All Displex protective glasses have a surface hardness of 10H and are therefore not only more scratch-, break- and shock-resistant than comparable brand products, but even surpass sapphire glass, which is used in luxury watches and has a hardness of 9H.<br>Even the edges, the area of the smartphone and protective glass most susceptible to breakage and impact, are specially hardened, rounded by 4-fold polishing and finished with a shock-absorbing edge. This elaborate production process further increases the protection against knocks and bumps and allows a particularly pleasant use of the smartphone. With these features, the protective glass is extremely resistant and guarantees maximum breakage resistance.<br><br>Case-friendly<br>Our Displex protective glass is manufactured to within 5/100 mm of the smartphone contours and therefore fits perfectly on your Galaxy S7 edge.
In addition, the protective film is This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-585-4291, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
01336
NSN:5330-00-585-4291 FSC:5330 CAGE:56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
material
RUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
shell_type
SOLID
thread_class
2B
flange_length
1.000 INCHES NOMINAL IN
overall_width
1.000 INCHES NOMINAL IN
overall_height
2.125 INCHES NOMINAL IN
overall_length
1.846 INCHES NOMINAL IN
hardness_rating
45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
special_features
THIS IS TYPE-C CONNECTORMODIFIED FOR PUSH-ON COUPLING
mating_end_quantity
1
nominal_thread_size
0.112 INCHES IN
contact_removability
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
NSN
5330-00-585-4291
COMPONENT DIAGRAM
KEY FEATURES
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
ELONGATION PERCENTAGE: 300 MAXIMUM
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL
RUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
HARDNESS RATING
45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01336?
01336 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Displex.
What parts can replace 01336?
There are 3 known substitutes for 01336: 357-9408-000, 22075, 357-9408-00. Substitute compatibility should be verified for your specific system.
What is the NSN for 01336?
01336 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-585-4291. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.