PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0130987-1
0130987-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CUP,COMPRESSION is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, overall_length: 1.000 INCHES NOMINAL IN, feather_edge_angle: 45.0 DEGREES NOMINAL, center_hole_diameter: 2.000 INCHES NOMINAL IN, fsc_application_data: 1. JACK ASSY,BULLDOZER, recess_inside_diameter: 6.000 INCHES NOMINAL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-275-6130, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0130987-1
NSN: 5340-00-275-6130
FSC: 5340
CAGE: 89926 — NEW HOLLAND CONSTRUCTION (USA)
SPECIFICATIONS
materialRUBBER OVERALL
overall_length1.000 INCHES NOMINAL IN
feather_edge_angle45.0 DEGREES NOMINAL
center_hole_diameter2.000 INCHES NOMINAL IN
fsc_application_data1. JACK ASSY,BULLDOZER
recess_inside_diameter6.000 INCHES NOMINAL IN
base_material_thickness0.125 INCHES NOMINAL IN
NSN5340-00-275-6130
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0130987-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATHER EDGE ANGLE: 45.0 DEGREES NOMINAL
•
CENTER HOLE DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER OVERALL
•
FSC APPLICATION DATA: 1. JACK ASSY,BULLDOZER
•
RECESS INSIDE DIAMETER: 6.000 INCHES NOMINAL IN
•
BASE MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FEATHER EDGE ANGLE45.0 DEGREES NOMINAL
CENTER HOLE DIAMETER2.000 INCHES NOMINAL IN
MATERIALRUBBER OVERALL
FSC APPLICATION DATA1. JACK ASSY,BULLDOZER
OVERALL LENGTH1.000 INCHES NOMINAL IN
RECESS INSIDE DIAMETER6.000 INCHES NOMINAL IN
BASE MATERIAL THICKNESS0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
30987Upgraded Successor
successor cross-reference
successor
130987Interchangeable
interchangeable cross-reference
interchangeable
A0186Interchangeable
interchangeable cross-reference
interchangeable
13098Interchangeable
interchangeable cross-reference
interchangeable
ASC1484722Interchangeable
interchangeable cross-reference
interchangeable
30985CKInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0130987-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0130987-1?
0130987-1 is a CUP,COMPRESSION.
What parts can replace 0130987-1?
There are 7 known substitutes for 0130987-1: 30987, 130987, A0186 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0130987-1?
0130987-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-275-6130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0130987-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026