PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0129-6
0129-6 ✓ Verified by PartsTable
APC · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

Complete line of Serial Cables and Adapters for communication, network, and peripheral connectivity. Key specifications include material: RUBBER SYNTHETIC OVERALL, groove_width: 0.094 INCHES NOMINAL IN, grommet_style: ROUND, hole_diameter: 0.188 INCHES NOMINAL IN, overall_height: 0.344 INCHES NOMINAL IN, flange_thickness: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-281-6568, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0129-6
NSN: 5325-00-281-6568
FSC: 5325
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
groove_width0.094 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter0.188 INCHES NOMINAL IN
overall_height0.344 INCHES NOMINAL IN
flange_thickness0.125 INCHES NOMINAL IN
special_featuresAPC SERIAL EXTENSION CABLE, DB9 MALE TO DB9 FEMALE, WIRED STRAIGHT THROOGH, FULLY SHIELDED, MOLDED, MAXIMUM WIDTH IS 178.00 MM, CORD LENGTH IS 1.83METERS, OUTPUT IS 1 PORT MM
groove_outside_diameter0.375 INCHES NOMINAL IN
grommet_construction_typeSOLID
large_flange_outside_diameter0.625 INCHES NOMINAL IN
NSN5325-00-281-6568
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 0129-6 · APC ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROMMET CONSTRUCTION TYPE: SOLID
•
FLANGE THICKNESS: 0.125 INCHES NOMINAL IN
•
GROOVE WIDTH: 0.094 INCHES NOMINAL IN
•
GROMMET STYLE: ROUND
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
GROOVE OUTSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
LARGE FLANGE OUTSIDE DIAMETER: 0.625 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
GROMMET CONSTRUCTION TYPESOLID
FLANGE THICKNESS0.125 INCHES NOMINAL IN
OVERALL HEIGHT0.344 INCHES NOMINAL IN
GROOVE WIDTH0.094 INCHES NOMINAL IN
GROMMET STYLEROUND
HOLE DIAMETER0.188 INCHES NOMINAL IN
GROOVE OUTSIDE DIAMETER0.375 INCHES NOMINAL IN
LARGE FLANGE OUTSIDE DIAMETER0.625 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
81500231Interchangeable
interchangeable cross-reference
interchangeable
RC741DNInterchangeable
interchangeable cross-reference
interchangeable
UA741CNInterchangeable
interchangeable cross-reference
interchangeable
31636Interchangeable
interchangeable cross-reference
interchangeable
YAD18-10FInterchangeable
interchangeable cross-reference
interchangeable
13210Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0129-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0129-6?
0129-6 is a CABLE ASSEMBLY,RADIO FREQUENCY manufactured by APC.
What parts can replace 0129-6?
There are 22 known substitutes for 0129-6: 81500231, RC741DN, UA741CN and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0129-6?
0129-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-281-6568. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0129-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026