PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 01276
01276 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 95.0 MILLIMETERS NOMINAL MM, overall_length: 130.0 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-236-6635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
01276
NSN: 5310-00-236-6635
FSC: 5310
CAGE: 17023 — BRUCE AEROSPACE INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length95.0 MILLIMETERS NOMINAL MM
flute_quantity2
overall_length130.0 MILLIMETERS NOMINAL MM
shank_diameter10.0 MILLIMETERS NOMINAL MM
special_featuresJOBBERS LG; METRIC SIZE 10.0MM MM
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter10.0 MILLIMETERS MM
cutting_rotation_directionRIGHT-HAND
NSN5310-00-236-6635
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 01276 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.310 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
THICKNESS: 0.020 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER0.310 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.020 INCHES NOMINAL IN
HOLE DIAMETER0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
150 10MMInterchangeable
interchangeable cross-reference
interchangeable
1333-10.0MMInterchangeable
interchangeable cross-reference
interchangeable
47343Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01276?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01276?
01276 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 01276?
There are 3 known substitutes for 01276: 150 10MM, 1333-10.0MM, 47343. Substitute compatibility should be verified for your specific system.
What is the NSN for 01276?
01276 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-236-6635. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01276

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026