PartsTable
Technical Data Sheet
Download PDF

01253 — HAMMER PAD

✓ Government record, cited
Displex · MRO · MRO_GENERAL
PRODUCT OVERVIEW

01253: HAMMER PAD.

Full Cover or 3D/ Curved Real Glass with EASY-ON® Eco Mounting Frame Full screen coverage Compared to the so-called 2D protective glasses, Displex Full Cover protective glasses cover not only the active display area, but the entire display area. This means optimum protection of the entire display and an improved user experience: maximum protection without annoying edges. This feature is particularly advantageous for smartphones with rounded displays.

Since the screen protector adapts perfectly to the rounded display and thus protects the entire display area. Tempered glass with rounded edges All Displex protective glasses have a surface hardness of 10H and are therefore not only more scratch-, break- and shock-resistant than comparable brand products, but even surpass sapphire glass, which is used in luxury watches and has a hardness of 9H. Even the edges, the area of the smartphone and protective glass most susceptible to breakage and impact, are specially This part is cataloged in the U.S.

Government catalog under NSN 5305-00-275-1546, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 01253
NSN: 5305-00-275-1546
NIINs: 002751546, 006027062
FSC: 5305 — Screws
CAGE: 80906 — BLAW-KNOX CONSTRUCTION EQUIPMENT CO DIV OF WHITE CONSOLIDATED INDUSTRIES INC (USA)
SPECIFICATIONS
end_item_identificationTELETYPEWRITER,TT-297/UG
general_characteristics_item_descriptionMATERIAL:BLACK MOLDED NEOPRENE RUBBER,STORAGE TEMPERATURE RANGE FROM -65 DEGREES C TO + 85 DEGREES C
NSN5305-00-275-1546
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 01253 · Displex ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.061 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.344 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.344 INCHES MAXIMUM IN
•
HARDNESS RATING: 27.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.061 INCHES MINIMUM AND 0.077 INCHES MAXIMUM IN
FASTENER LENGTH0.344 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OR AISI/SAE ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.344 INCHES MAXIMUM IN
HARDNESS RATING27.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 416
MINIMUM TENSILE STRENGTH95000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 01253?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01253?
01253 is a HAMMER PAD manufactured by Displex. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 01253?
01253 is cataloged in the U.S. Government catalog under NSN 5305-00-275-1546. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01253