PartsTable
Technical Data Sheet
Download PDF

012525-6 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

012525-6: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.418 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-162-9686, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
012525-6
NSN: 5305-01-162-9686
FSC: 5305 — Screws
CAGE: 1FP59 — IKON SYSTEMS INC (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
thread_class3A A
thread_length0.418 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_between_flats0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentCHROMATE ZINC
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-162-9686
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 012525-6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CHROMATE ZINC
•
FASTENER LENGTH: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.418 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCHROMATE ZINC
FASTENER LENGTH0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD LENGTH0.418 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIALSTEEL
THREAD CLASS3A A
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
90267D194Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 012525-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 012525-6?
012525-6 is a SCREW,MACHINE.
What parts can replace 012525-6?
There is 1 known substitute for 012525-6: 90267D194. Substitute compatibility should be verified for your specific system.
What is the NSN for 012525-6?
012525-6 is cataloged in the U.S. Government catalog under NSN 5305-01-162-9686. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 012525-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.