PartsTable
Technical Data Sheet
PartsTable / MRO / 01215

01215 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The TELETYPEWRITER SUBASSEMBLY is a the manufacturer industrial component. Key specifications include end_item_identification: 5815-00-078-5480,TELETYPEWRITER SET,AN/TGC-14A/V A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-413-9163, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 01215
NSN: 3120-00-413-9163
FSC: 3120
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
end_item_identification5815-00-078-5480,TELETYPEWRITER SET,AN/TGC-14A/V A
NSN3120-00-413-9163
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 01215 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY INSIDE DIAMETER: 0.7700 INCHES MINIMUM AND 0.7750 INCHES MAXIMUM IN
•
SURFACE FINISH: 125.0 MICROINCHES RIGHT END SURFACE OF BODY
•
STYLE DESIGNATOR: SPLIT, PLAIN, NO OUTSIDE FLANGES
•
BODY OUTSIDE DIAMETER: 0.8150 INCHES MINIMUM AND 0.8210 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH0.3550 INCHES NOMINAL IN
BODY INSIDE DIAMETER0.7700 INCHES MINIMUM AND 0.7750 INCHES MAXIMUM IN
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
STYLE DESIGNATORSPLIT, PLAIN, NO OUTSIDE FLANGES
BODY OUTSIDE DIAMETER0.8150 INCHES MINIMUM AND 0.8210 INCHES MAXIMUM IN
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY
MATERIALPLASTIC OVERALL
SURFACE FINISH63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
CORNER SHAPESQUARE ALL CORNERS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
1215Interchangeable
interchangeable cross-reference
interchangeable
6002-326Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01215?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01215?
01215 is a TELETYPEWRITER SUBASSEMBLY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 01215?
There are 2 known substitutes for 01215: 1215, 6002-326. Substitute compatibility should be verified for your specific system.
What is the NSN for 01215?
01215 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-413-9163. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01215

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026