PartsTable
Technical Data Sheet
PartsTable / MRO / 012
012 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The FILTER ELEMENT,FLUID is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, head_style: FLAT CHAMFER, point_type: CONVENTIONAL, body_length: 1.188 INCHES NOMINAL IN, head_height: 0.038 INCHES NOMINAL IN, point_angle: 118.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1726, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 012
NSN: 3110-00-156-1726
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
head_styleFLAT CHAMFER
point_typeCONVENTIONAL
body_length1.188 INCHES NOMINAL IN
head_height0.038 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length2.312 INCHES NOMINAL IN
thread_class3A A
usage_designOUTDOOR
head_diameter0.156 INCHES NOMINAL IN
overall_width4.620 INCHES MAXIMUM IN
NSN3110-00-156-1726
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 012 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SMALLEST DIAMETER: 1.5000 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 2.3438 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
BORE SMALLEST DIAMETER1.5000 INCHES NOMINAL IN
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER2.3438 INCHES NOMINAL IN
SPECIAL FEATURES1.5313 LARGE BORE
ALIGNMENT TYPERIGID
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATORGROOVED RACE SURFACE
OVERALL HEIGHT0.7188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
GGG-K-00275Interchangeable
interchangeable cross-reference
interchangeable
138011-1Interchangeable
interchangeable cross-reference
interchangeable
14085Interchangeable
interchangeable cross-reference
interchangeable
1340Interchangeable
interchangeable cross-reference
interchangeable
350-RTInterchangeable
interchangeable cross-reference
interchangeable
2012-T 12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 012?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 012?
012 is a FILTER ELEMENT,FLUID. It is classified as a MRO (MRO_GENERAL).
What parts can replace 012?
There are 22 known substitutes for 012: GGG-K-00275, 138011-1, 14085 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 012?
012 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1726. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 012

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026