PartsTable
Technical Data Sheet
Download PDF

011324 — CLAMP,HOSE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

011324: CLAMP,HOSE.

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.101 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN, thread_length: 0.250 INCHES NOMINAL IN, screw_material: STEEL COMP 302 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 316, fastener_length: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-189-9131, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
011324
NSN: 5310-00-189-9131
NIINs: 001899131, 006825924, 013058382, 015622168
FSC: 5310 — Nuts and Washers
CAGE: 05643 — BARBER-GREENE CO (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.101 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
thread_length0.250 INCHES NOMINAL IN
screw_materialSTEEL COMP 302 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 316
fastener_length0.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.060 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch80
NSN5310-00-189-9131
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 011324 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.199 INCHES NOMINAL IN
•
COLOR: BLACK OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.778 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER1.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.199 INCHES NOMINAL IN
COLORBLACK OVERALL
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.778 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
27L87Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 011324?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 011324?
011324 is a CLAMP,HOSE.
What parts can replace 011324?
There is 1 known substitute for 011324: 27L87. Substitute compatibility should be verified for your specific system.
What is the NSN for 011324?
011324 is cataloged in the U.S. Government catalog under NSN 5310-00-189-9131. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 011324

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.