PartsTable
Technical Data Sheet
PartsTable / MRO / 01121
01121 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include material: PLASTIC CASE, body_style: PANEL MOUNT, point_type: CONVENTIONAL, body_length: 0.203 INCHES NOMINAL IN, point_angle: 118.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-105-8306, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 01121
NSN: 5340-00-105-8306
FSC: 5340
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_stylePANEL MOUNT
point_typeCONVENTIONAL
body_length0.203 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length1.625 INCHES NOMINAL IN
body_diameter0.090 INCHES NOMINAL IN
body_materialMETAL
cubic_measure0.002 CUBIC INCHES
hole_diameter0.219 INCHES NOMINAL IN
terminal_typeWIRE LEAD
NSN5340-00-105-8306
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 01121 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER
•
OUTSIDE/TOP FLANGE DIAMETER: 0.812 INCHES NOMINAL IN
•
MATERIAL HARDNESS RATING: 75.0 DUROMETER MINIMUM AND 85.0 DUROMETER MAXIMUM
•
STYLE DESIGNATOR: FLAT TOP COUNTERBORED
•
FIRST COUNTERBORE DEPTH: 0.281 INCHES NOMINAL IN
•
FIRST COUNTERBORE DIAMETER: 0.375 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.219 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER
OUTSIDE/TOP FLANGE DIAMETER0.812 INCHES NOMINAL IN
MATERIAL HARDNESS RATING75.0 DUROMETER MINIMUM AND 85.0 DUROMETER MAXIMUM
STYLE DESIGNATORFLAT TOP COUNTERBORED
FIRST COUNTERBORE DEPTH0.281 INCHES NOMINAL IN
FIRST COUNTERBORE DIAMETER0.375 INCHES NOMINAL IN
HOLE DIAMETER0.219 INCHES NOMINAL IN
OVERALL HEIGHT0.594 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855, CLASS 2 MIL SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
57312-0001-00Interchangeable
interchangeable cross-reference
interchangeable
1-246-425-00Interchangeable
interchangeable cross-reference
interchangeable
4704-147868Interchangeable
interchangeable cross-reference
interchangeable
1340Interchangeable
interchangeable cross-reference
interchangeable
44101Interchangeable
interchangeable cross-reference
interchangeable
12231Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01121?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01121?
01121 is a RESISTOR,FIXED,COMPOSITION. It is classified as a MRO (MRO_GENERAL).
What parts can replace 01121?
There are 16 known substitutes for 01121: 57312-0001-00, 1-246-425-00, 4704-147868 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 01121?
01121 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-105-8306. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01121

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026