PartsTable
Technical Data Sheet
Download PDF

011070 — FAN,TUBEAXIAL

✓ Government record, cited
Contour Design · NUT WASHER
PRODUCT OVERVIEW

011070: FAN,TUBEAXIAL.

Based off of the iSee iPhone 3G, the Contour HardSkin retains all of the protective qualities of its underlying chassis. From the sleek, durable hardshell to the click through buttons covering the volume and power switches, the HardSkin iPhone 3G offers total protection while still allowing full access to all of the controls. Add to all that a rich rubber texture finish and you will know, without a doubt, when you are holding a Contour HardSkin.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-152-4712, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
011070
NSN: 5315-01-152-4712
NIINs: 011524712, 012935103
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: K6111 — QIOPTIQ LTD (GBR)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
drive_typeDIRECT
inclosure_typeFULLY INCLOSED
prime_mover_typeELECTRIC MOTOR
special_featuresHAS FAN PERFORMANCE SENSOR
style_designatorFIXED
surface_treatmentENAMEL OVERALL
electrical_connection_typeTERMINAL BLOCK
prime_mover_drive_shaft_bearing_typeBALL
rotation_direction_for_which_designedCLOCKWISE
NSN5315-01-152-4712
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 011070 · Contour Design ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OR B S 970-EN58AM NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 20.0 DEGREES MINIMUM AND 40.0 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 0.0939 INCHES MINIMUM AND 0.0941 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.540 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TYPICAL APPLICATIONS
  • Server thermal management and cooling
  • Hot-swap fan replacement in production environments
  • Redundant cooling for high-availability systems
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OR B S 970-EN58AM NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE20.0 DEGREES MINIMUM AND 40.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.0939 INCHES MINIMUM AND 0.0941 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.540 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL CORROSION RESISTING OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 011070?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 011070?
011070 is a FAN,TUBEAXIAL manufactured by Contour Design.
What is the NSN for 011070?
011070 is cataloged in the U.S. Government catalog under NSN 5315-01-152-4712. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 011070

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.