PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0107-0003
0107-0003 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, overall_width: 5.750 INCHES NOMINAL IN, aperture_width: 5.000 INCHES NOMINAL IN, overall_length: 7.250 INCHES NOMINAL IN, aperture_length: 6.500 INCHES NOMINAL IN, style_designator: NON-CIRCULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-044-3068, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0107-0003
NSN: 5330-01-044-3068
FSC: 5330
CAGE: 34830 — ROGERSON KRATOS (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
overall_width5.750 INCHES NOMINAL IN
aperture_width5.000 INCHES NOMINAL IN
overall_length7.250 INCHES NOMINAL IN
aperture_length6.500 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
outside_corner_radius0.406 INCHES NOMINAL IN
material_document_and_classificationMIL-R-6855 CL 2 GR 40 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-044-3068
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0107-0003 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855 CL 2 GR 40 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE LENGTH: 6.500 INCHES NOMINAL IN
•
APERTURE WIDTH: 5.000 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855 CL 2 GR 40 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH7.250 INCHES NOMINAL IN
OVERALL WIDTH5.750 INCHES NOMINAL IN
APERTURE LENGTH6.500 INCHES NOMINAL IN
APERTURE WIDTH5.000 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.406 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
16077Interchangeable
interchangeable cross-reference
interchangeable
99116077Interchangeable
interchangeable cross-reference
interchangeable
10F112CG1087-12VDCInterchangeable
interchangeable cross-reference
interchangeable
3TRY172Interchangeable
interchangeable cross-reference
interchangeable
1001-87Interchangeable
interchangeable cross-reference
interchangeable
80201-16077Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0107-0003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0107-0003?
0107-0003 is a GASKET.
What parts can replace 0107-0003?
There are 7 known substitutes for 0107-0003: 16077, 99116077, 10F112CG1087-12VDC and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0107-0003?
0107-0003 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-044-3068. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0107-0003

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026