PartsTable
Technical Data Sheet
Download PDF

0106-8-8 — STRAIGHT ADAPT,SPEC

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

0106-8-8: STRAIGHT ADAPT,SPEC.

The STRAIGHT ADAPT,SPEC is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN, outside_diameter: 0.175 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: PASSIVATE OVERALL, material_thickness: 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-543-4652, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0106-8-8
NSN: 5310-00-543-4652
NIINs: 005434652, 015962169
FSC: 5310 — Nuts and Washers
CAGE: D0078 — DIEHL DEFENCE GMBH & CO. KG (DEU)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
outside_diameter0.175 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentPASSIVATE OVERALL
material_thickness0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
end_item_identificationHOWITZER;B-52 SUPPORT EQUIPMENT;AIRBORNE MOBILE DIR AIR SPT CT;B-1 SUPPORT EQUIPMENT;SATELLITE COMMUNICATIONS TERM;TRAFFIC JAM, AN/TLQ-17A;RADAR SET;AIRCRAFT;B-1B TRAINER;PHALANX A
nondefinitive_spec/std_dataA TYPE
NSN5310-00-543-4652
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 0106-8-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
OUTSIDE DIAMETER: 0.175 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
HOLE DIAMETER: 0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFLAT INTERNAL TEETH
OUTSIDE DIAMETER0.175 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
MATERIAL THICKNESS0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAA TYPE
SURFACE TREATMENTPASSIVATE OVERALL
END ITEM IDENTIFICATIONHOWITZER;B-52 SUPPORT EQUIPMENT;AIRBORNE MOBILE DIR AIR SPT CT;B-1 SUPPORT EQUIPMENT;SATELLITE COMMUNICATIONS TERM;TRAFFIC JAM, AN/TLQ-17A;RADAR SET;AIRCRAFT;B-1B TRAINER;PHALANX A
MATERIALSTEEL CORROSION RESISTING OVERALL
HOLE DIAMETER0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 9
MS35333-69Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
411100-69Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
373-8500-000Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
100354-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
959-086-0001Reference document
Same NSN cross-reference
Reference document — Secondary reference
980-0001-324Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 0106-8-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0106-8-8?
0106-8-8 is a STRAIGHT ADAPT,SPEC.
What parts can replace 0106-8-8?
There are 9 known substitutes for 0106-8-8: MS35333-69, 411100-69, 373-8500-000 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0106-8-8?
0106-8-8 is cataloged in the U.S. Government catalog under NSN 5310-00-543-4652. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0106-8-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.