PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0104AN05
0104AN05 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, taper_angle: 40.00 DEGREES NOMINAL, overall_width: 0.2120 INCHES NOMINAL IN, load_direction: ANGULAR, special_features: W/RETAINMENT PLATE AND SNAP RING, style_designator: MACHINED OUTER RING, OPEN END, NON-SEPARABLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-4933, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0104AN05
NSN: 3110-00-227-4933
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
taper_angle40.00 DEGREES NOMINAL
overall_width0.2120 INCHES NOMINAL IN
load_directionANGULAR
special_featuresW/RETAINMENT PLATE AND SNAP RING
style_designatorMACHINED OUTER RING, OPEN END, NON-SEPARABLE
bearing_ball_quantity5
overall_outside_diameter0.6299 INCHES NOMINAL IN
rolling_element_diameter0.1563 INCHES NOMINAL IN
NSN3110-00-227-4933
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 0104AN05 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: MACHINED OUTER RING, OPEN END, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
TAPER ANGLE: 40.00 DEGREES NOMINAL
•
ROLLING ELEMENT DIAMETER: 0.1563 INCHES NOMINAL IN
•
BEARING BALL QUANTITY: 5
•
OVERALL OUTSIDE DIAMETER: 0.6299 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORMACHINED OUTER RING, OPEN END, NON-SEPARABLE
MATERIALSTEEL OVERALL
TAPER ANGLE40.00 DEGREES NOMINAL
ROLLING ELEMENT DIAMETER0.1563 INCHES NOMINAL IN
SPECIAL FEATURESW/RETAINMENT PLATE AND SNAP RING
BEARING BALL QUANTITY5
OVERALL OUTSIDE DIAMETER0.6299 INCHES NOMINAL IN
OVERALL WIDTH0.2120 INCHES NOMINAL IN
LOAD DIRECTIONANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
278-2111-010Interchangeable
interchangeable cross-reference
interchangeable
Z6Interchangeable
interchangeable cross-reference
interchangeable
M221Interchangeable
interchangeable cross-reference
interchangeable
221Interchangeable
interchangeable cross-reference
interchangeable
ANSI C18.1MInterchangeable
interchangeable cross-reference
interchangeable
0104A5JInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0104AN05?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0104AN05?
0104AN05 is a COIL,RADIO FREQUENCY.
What parts can replace 0104AN05?
There are 12 known substitutes for 0104AN05: 278-2111-010, Z6, M221 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0104AN05?
0104AN05 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-4933. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0104AN05

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026