PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 01034
01034 ✓ Verified by PartsTable
Displex · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DISPLEX safety glass screen protector made from tempered real glass, provides for crystal-clear and extremely robust protection against scratches and impact. Of course crystal clear and with a perfect touch! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-236-1498, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
01034
NSN: 5330-00-236-1498
FSC: 5330
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
colorWHITE
length20.0 FEET NOMINAL FT
materialPLASTIC POLYVINYL CHLORIDE (PVC)
wall_thickness0.365 INCHES MINIMUM IN
inside_diameter9.976 INCHES NOMINAL IN
outside_diameter10.750 INCHES NOMINAL IN
operating_pressure140.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
end_connection_stylePLAIN
nominal_pipe_size_designation10.000 INCHES IN
NSN5330-00-236-1498
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 01034 MFR: Displex ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 2.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CENTER HOLE DIAMETER: 0.969 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER2.188 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
CENTER HOLE DIAMETER0.969 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
C01034Interchangeable
interchangeable cross-reference
interchangeable
2001 70Interchangeable
interchangeable cross-reference
interchangeable
503-S 70Interchangeable
interchangeable cross-reference
interchangeable
127Interchangeable
interchangeable cross-reference
interchangeable
57026Interchangeable
interchangeable cross-reference
interchangeable
51006Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01034?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01034?
01034 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E manufactured by Displex.
What parts can replace 01034?
There are 11 known substitutes for 01034: C01034, 2001 70, 503-S 70 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 01034?
01034 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-236-1498. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01034

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026