PartsTable
Technical Data Sheet
Download PDF

010165-1 — ROD,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

010165-1: ROD,STRAIGHT,HEADLESS.

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, chamfer_angle: 45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED, chamfer_length: 0.880 INCHES MINIMUM AND 1.000 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 60.000 INCHES NOMINAL IN, overall_diameter: 0.620 INCHES NOMINAL IN, surface_treatment: ZINC OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-225-4150, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
010165-1
NSN: 5340-01-225-4150
FSC: 5340 — Hardware, Commercial
CAGE: 1FP59 — IKON SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
chamfer_angle45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
chamfer_length0.880 INCHES MINIMUM AND 1.000 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_length60.000 INCHES NOMINAL IN
overall_diameter0.620 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
material_document_and_classificationASTM A575 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-225-4150
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 010165-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.880 INCHES MINIMUM AND 1.000 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
OVERALL DIAMETER: 0.620 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A575 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
•
CHAMFER ANGLE: 45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.880 INCHES MINIMUM AND 1.000 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL DIAMETER0.620 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A575 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH60.000 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
CHAMFER ANGLE45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
8143153-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8143153-01Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 010165-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 010165-1?
010165-1 is a ROD,STRAIGHT,HEADLESS.
What parts can replace 010165-1?
There are 2 known substitutes for 010165-1: 8143153-1, 8143153-01. Substitute compatibility should be verified for your specific system.
What is the NSN for 010165-1?
010165-1 is cataloged in the U.S. Government catalog under NSN 5340-01-225-4150. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 010165-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.