PartsTable
Technical Data Sheet
Download PDF

01014249 — NUT,PLAIN,SPLINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

01014249: NUT,PLAIN,SPLINE.

The NUT,PLAIN,SPLINE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, nut_style: SPLINE, nut_height: 0.152 INCHES NOMINAL IN, nut_diameter: 0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, pilot_length: 0.090 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-449-8834, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
01014249
NSN: 5310-01-449-8834
FSC: 5310 — Nuts and Washers
CAGE: 59782 — COMMUNICATIONS & POWER INDUSTRIES LLC DIV MICROWAVE POWER PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
nut_styleSPLINE
nut_height0.152 INCHES NOMINAL IN
nut_diameter0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
pilot_length0.090 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.176 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentTIN OVERALL
nominal_thread_size0.112 INCHES IN
thread_quantity_per_inch40
NSN5310-01-449-8834
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 01014249 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-T-10727 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
NUT DIAMETER: 0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
•
PILOT DIAMETER: 0.176 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.090 INCHES MAXIMUM IN
•
NUT HEIGHT: 0.152 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-T-10727 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
NUT DIAMETER0.215 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
PILOT DIAMETER0.176 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
PILOT LENGTH0.090 INCHES MAXIMUM IN
NUT HEIGHT0.152 INCHES NOMINAL IN
SURFACE TREATMENTTIN OVERALL
NUT STYLESPLINE
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
KFB3-440-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 01014249?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01014249?
01014249 is a NUT,PLAIN,SPLINE.
What parts can replace 01014249?
There is 1 known substitute for 01014249: KFB3-440-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 01014249?
01014249 is cataloged in the U.S. Government catalog under NSN 5310-01-449-8834. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01014249