PartsTable
Technical Data Sheet
Download PDF

0100240088 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

0100240088: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 21.180 INCHES NOMINAL IN, cross-sectional_height: 0.147 INCHES NOMINAL IN, end_item_identification: ACTUATOR, PLATFORM LOCK. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-648-9957, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0100240088
NSN: 5331-01-648-9957
FSC: 5331 — O-ring
CAGE: 84561 — PARKER HANNIFIN CORPORATION DBA PNEUTRONICS DIV CYLINDER DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating75.0 SHORE DUROMETER A NOMINAL
center_hole_diameter21.180 INCHES NOMINAL IN
cross-sectional_height0.147 INCHES NOMINAL IN
end_item_identificationACTUATOR, PLATFORM LOCK
NSN5331-01-648-9957
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 0100240088 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.147 INCHES NOMINAL IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 21.180 INCHES NOMINAL IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.147 INCHES NOMINAL IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER21.180 INCHES NOMINAL IN
END ITEM IDENTIFICATIONACTUATOR, PLATFORM LOCK
MATERIALRUBBER FLUOROCARBON CLASS FPM
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
SKD168962 ITEM 88Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 0100240088?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0100240088?
0100240088 is a O-RING.
What parts can replace 0100240088?
There is 1 known substitute for 0100240088: SKD168962 ITEM 88. Substitute compatibility should be verified for your specific system.
What is the NSN for 0100240088?
0100240088 is cataloged in the U.S. Government catalog under NSN 5331-01-648-9957. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0100240088