PartsTable
Technical Data Sheet
Download PDF

01001-011 — HEAT SINK-INSULATOR

✓ Government record, cited
— · FAN MODULE
PRODUCT OVERVIEW

01001-011: HEAT SINK-INSULATOR.

The HEAT SINK-INSULATOR is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYVINYL CHLORIDE (PVC) OVERALL, leg_length: 2.437 INCHES NOMINAL ALL ENDS IN, connection_type: UNTHREADED INTERNAL PIPE ALL ENDS, maximum_operating_temp: 60.0 CELSIUS SINGLE RESPONSE DEGC, end_item_identification: DIGITAC CONTROLLER, FAC-2000, nominal_pipe_size_accommodated: 1.500 INCHES ALL ENDS IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-162-2560, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
01001-011
NSN: 4730-00-162-2560
NIINs: 001622560, 014532523
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 61623 — NIBCO INC CHEMTROL DIV (USA)
SPECIFICATIONS
materialPLASTIC POLYVINYL CHLORIDE (PVC) OVERALL
leg_length2.437 INCHES NOMINAL ALL ENDS IN
connection_typeUNTHREADED INTERNAL PIPE ALL ENDS
maximum_operating_temp60.0 CELSIUS SINGLE RESPONSE DEGC
end_item_identificationDIGITAC CONTROLLER, FAC-2000
nominal_pipe_size_accommodated1.500 INCHES ALL ENDS IN
pipe_wall_thickness_designation_for_which_designedSCHEDULE 80 ALL ENDS
NSN4730-00-162-2560
COMPONENT DIAGRAM
HANDLE 60mm 60mm HOT-PLUG COOL IN HOT OUT DUAL ROTOR HOT-SWAP FAN MODULE | 60mm Dual Rotor | FRONT-TO-BACK Hot-plug | Redundant | TITLE FAN MODULE PN 01001-011 MFR OEM HEAT SINK-INSULATOR
KEY FEATURES
•
NOMINAL PIPE SIZE ACCOMMODATED: 1.500 INCHES ALL ENDS IN
•
CONNECTION TYPE: UNTHREADED INTERNAL PIPE ALL ENDS
•
LEG LENGTH: 2.437 INCHES NOMINAL ALL ENDS IN
•
MAXIMUM OPERATING TEMP: 60.0 CELSIUS SINGLE RESPONSE DEGC
•
PIPE WALL THICKNESS DESIGNATION FOR WHICH DESIGNED: SCHEDULE 80 ALL ENDS
•
MATERIAL: PLASTIC POLYVINYL CHLORIDE (PVC) OVERALL
TECHNICAL CHARACTERISTICS
NOMINAL PIPE SIZE ACCOMMODATED1.500 INCHES ALL ENDS IN
CONNECTION TYPEUNTHREADED INTERNAL PIPE ALL ENDS
LEG LENGTH2.437 INCHES NOMINAL ALL ENDS IN
MAXIMUM OPERATING TEMP60.0 CELSIUS SINGLE RESPONSE DEGC
PIPE WALL THICKNESS DESIGNATION FOR WHICH DESIGNEDSCHEDULE 80 ALL ENDS
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL
MATERIALPLASTIC POLYVINYL CHLORIDE (PVC) OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
8136Reference document
Same NSN cross-reference
Reference document — Secondary reference
ASTM D2467Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
806-015Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0033120-015Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
11302Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 01001-011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01001-011?
01001-011 is a HEAT SINK-INSULATOR.
What parts can replace 01001-011?
There are 5 known substitutes for 01001-011: 8136, ASTM D2467, 806-015 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 01001-011?
01001-011 is cataloged in the U.S. Government catalog under NSN 4730-00-162-2560. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01001-011