PartsTable
Technical Data Sheet
PartsTable / O-RING / 010-11506
010-11506 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, center_hole_diameter: 0.232 INCHES MINIMUM AND 0.246 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-017-4152, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
010-11506
NSN: 5331-01-017-4152
FSC: 5331 — O-RING
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
temp_rating-60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
hardness_rating60.0 SHORE DUROMETER A NOMINAL
outside_diameter0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
center_hole_diameter0.232 INCHES MINIMUM AND 0.246 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-01-017-4152
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 010-11506 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.232 INCHES MINIMUM AND 0.246 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
•
TEMP RATING: -60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.232 INCHES MINIMUM AND 0.246 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
TEMP RATING-60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
740621Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-3533Interchangeable
interchangeable cross-reference
interchangeable
AS 568-010Interchangeable
interchangeable cross-reference
interchangeable
693RAPC18Interchangeable
interchangeable cross-reference
interchangeable
100A10-5Interchangeable
interchangeable cross-reference
interchangeable
B0318 2-010Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 010-11506?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 010-11506?
010-11506 is a O-RING.
What parts can replace 010-11506?
There are 32 known substitutes for 010-11506: 740621, MIL-R-3533, AS 568-010 and 29 more. Substitute compatibility should be verified for your specific system.
Is 010-11506 still available?
010-11506 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 010-11506

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026