PartsTable
Technical Data Sheet
Download PDF

01-22281 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

01-22281: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include angle: 23.5 DEGREES MINIMUM AND 24.5 DEGREES MAXIMUM, material: RUBBER NATURAL OR RUBBER SYNTHETIC OVERALL, peripheral_diameter: 1.006 INCHES MINIMUM AND 1.014 INCHES MAXIMUM IN, center_hole_diameter: 0.688 INCHES NOMINAL IN, cross-sectional_height: 0.234 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN, cross-sectional_shape_style: CUP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-510-2763, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
01-22281
NSN: 5330-00-510-2763
FSC: 5330 — Packing and Gasket Materials
CAGE: 70709 — MARISON INDUSTRIES INC BARCO DIV (USA)
SPECIFICATIONS
angle23.5 DEGREES MINIMUM AND 24.5 DEGREES MAXIMUM
materialRUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
peripheral_diameter1.006 INCHES MINIMUM AND 1.014 INCHES MAXIMUM IN
center_hole_diameter0.688 INCHES NOMINAL IN
cross-sectional_height0.234 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
cross-sectional_shape_styleCUP
NSN5330-00-510-2763
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 01-22281 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.234 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
ANGLE: 23.5 DEGREES MINIMUM AND 24.5 DEGREES MAXIMUM
•
PERIPHERAL DIAMETER: 1.006 INCHES MINIMUM AND 1.014 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.688 INCHES NOMINAL IN
•
MATERIAL: RUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.234 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLECUP
ANGLE23.5 DEGREES MINIMUM AND 24.5 DEGREES MAXIMUM
PERIPHERAL DIAMETER1.006 INCHES MINIMUM AND 1.014 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.688 INCHES NOMINAL IN
MATERIALRUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
8526213Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 01-22281?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01-22281?
01-22281 is a PACKING,PREFORMED.
What parts can replace 01-22281?
There is 1 known substitute for 01-22281: 8526213. Substitute compatibility should be verified for your specific system.
What is the NSN for 01-22281?
01-22281 is cataloged in the U.S. Government catalog under NSN 5330-00-510-2763. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01-22281