PartsTable
Technical Data Sheet
01-222 ✓ Verified by PartsTable
Displex · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Full Cover or 3D/ Curved Real Glass with EASY-ON® Mounting Frame<br> <br>Full screen coverage<br>Compared to the so-called 2D protective glasses, Displex Full Cover protective glasses cover not only the active display area, but the entire display area. This means optimum protection of the entire display and an improved user experience: maximum protection without annoying edges.<br>This feature is particularly advantageous for smartphones with rounded displays. Since the screen protector adapts perfectly to the rounded display and thus protects the entire display area.<br> <br>Tempered glass with rounded edges<br>All Displex protective glasses have a surface hardness of 10H and are therefore not only more scratch-, break- and shock-resistant than comparable brand products, but even surpass sapphire glass, which is used in luxury watches and has a hardness of 9H.<br>Even the edges, the area of the smartphone and protective glass most susceptible to breakage and impact, are specially hard This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-068-1782, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 01-222
NSN: 5331-00-068-1782
FSC: 5331 — O-RING
CAGE: 72922 — GROSS MECHANICAL LABORATORIES INC (USA)
SPECIFICATIONS
Part Number01-222
ManufacturerDisplex
NSN5331-00-068-1782
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 01-222 MFR: Displex ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT: 0.143 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT0.143 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
01222Interchangeable
interchangeable cross-reference
interchangeable
A6850Interchangeable
interchangeable cross-reference
interchangeable
VS7 1-4X1-4Interchangeable
interchangeable cross-reference
interchangeable
6002-342Interchangeable
interchangeable cross-reference
interchangeable
1222Interchangeable
interchangeable cross-reference
interchangeable
41-10395-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01-222?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01-222?
01-222 is a COCK,SHUTOFF,SCREW STEM manufactured by Displex. It is classified as a MRO (MRO_GENERAL).
What parts can replace 01-222?
There are 9 known substitutes for 01-222: 01222, A6850, VS7 1-4X1-4 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 01-222?
01-222 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-068-1782. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01-222