PartsTable
Technical Data Sheet
01-218 ✓ Verified by PartsTable
Displex · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Real Glass (2D) with EASY-ON® Mounting Frame<br> <br>Tempered glass with rounded edges<br>All Displex protective glasses have a surface hardness of 10H and are therefore not only more scratch-, break- and shock-resistant than comparable brand products, but even surpass sapphire glass, which is used in luxury watches and has a hardness of 9H.<br>Even the edges, the area of the smartphone and protective glass most susceptible to breakage and impact, are specially hardened, rounded by 4-fold polishing and finished with a shock-absorbing edge. This elaborate production process further increases the protection against knocks and bumps and allows a particularly pleasant use of the smartphone. With these features, the protective glass is extremely resistant and guarantees maximum breakage resistance.<br> <br>Case-friendly<br>Our Displex protective glass is manufactured to within 5/100 mm of the smartphone contours and therefore fits perfectly on your Galaxy S7 edge.

In addition, the protectiv This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-068-1872, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
01-218
NSN: 5331-00-068-1872
FSC: 5331 — O-RING
CAGE: 72922 — GROSS MECHANICAL LABORATORIES INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
side_length2.000 INCHES NOMINAL IN
flute_length73.0 MILLIMETERS NOMINAL MM
hole_diameter0.160 INCHES MINIMUM AND 0.166 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.750 INCHES NOMINAL IN
flute_quantity2
overall_length105.0 MILLIMETERS NOMINAL MM
shank_diameter7.0 MILLIMETERS NOMINAL MM
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
NSN5331-00-068-1872
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 01-218 MFR: Displex ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.143 INCHES NOMINAL IN
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.143 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
1W86AInterchangeable
interchangeable cross-reference
interchangeable
SCD1134Interchangeable
interchangeable cross-reference
interchangeable
25686Interchangeable
interchangeable cross-reference
interchangeable
02218Interchangeable
interchangeable cross-reference
interchangeable
01-218Interchangeable
interchangeable cross-reference
interchangeable
1028789Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01-218?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01-218?
01-218 is a INSULATOR,STRAIN manufactured by Displex.
What parts can replace 01-218?
There are 12 known substitutes for 01-218: 1W86A, SCD1134, 25686 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 01-218?
01-218 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-068-1872. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01-218