PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 01-113-0012-4 PC35
01-113-0012-4 PC35 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.358 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, outside_diameter: 3.005 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-861-2295, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
01-113-0012-4 PC35
NSN: 5330-00-861-2295
FSC: 5330
CAGE: 17454 — TIMKEN GEARS & SERVICES INC. DIV PHILADELPHIA GEAR (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.358 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
outside_diameter3.005 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter3.005 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.125 INCHES NOMINAL IN
NSN5330-00-861-2295
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 01-113-0012-4 PC35 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 3.005 INCHES NOMINAL IN
•
SEAL WIDTH: 0.358 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
MATERIAL: STEEL CASE
•
HOUSING BORE DIAMETER: 3.005 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER3.005 INCHES NOMINAL IN
SEAL WIDTH0.358 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
MATERIALSTEEL CASE
MATERIALRUBBER SEALING ELEMENT
HOUSING BORE DIAMETER3.005 INCHES NOMINAL IN
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER2.125 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
21163Interchangeable
interchangeable cross-reference
interchangeable
DM74163NInterchangeable
interchangeable cross-reference
interchangeable
510001500Interchangeable
interchangeable cross-reference
interchangeable
2846576Interchangeable
interchangeable cross-reference
interchangeable
2953735Interchangeable
interchangeable cross-reference
interchangeable
60810Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01-113-0012-4 PC35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01-113-0012-4 PC35?
01-113-0012-4 PC35 is a SEAL,PLAIN ENCASED.
What parts can replace 01-113-0012-4 PC35?
There are 20 known substitutes for 01-113-0012-4 PC35: 21163, DM74163N, 510001500 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 01-113-0012-4 PC35?
01-113-0012-4 PC35 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-861-2295. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01-113-0012-4 PC35

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026