PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 01-110-0002-4-ITEM 33
01-110-0002-4-ITEM 33 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 0.500 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, housing_bore_diameter: 8.500 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-421-7928, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
01-110-0002-4-ITEM 33
NSN: 5330-00-421-7928
FSC: 5330
CAGE: 17454 — TIMKEN GEARS & SERVICES INC. DIV PHILADELPHIA GEAR (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width0.500 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
housing_bore_diameter8.500 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter7.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-421-7928
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 01-110-0002-4-ITEM 33 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 8.500 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
ACCOMMODATED SHAFT DIAMETER: 7.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER8.500 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
ACCOMMODATED SHAFT DIAMETER7.000 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
SEAL WIDTH0.500 INCHES NOMINAL IN
CASE STYLERECESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
SSRIF-1438ZZRA3P25LG68Interchangeable
interchangeable cross-reference
interchangeable
70077Interchangeable
interchangeable cross-reference
interchangeable
SSRIF1438ZZA3LG20Interchangeable
interchangeable cross-reference
interchangeable
70079Interchangeable
interchangeable cross-reference
interchangeable
16P48Interchangeable
interchangeable cross-reference
interchangeable
900123-181Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01-110-0002-4-ITEM 33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01-110-0002-4-ITEM 33?
01-110-0002-4-ITEM 33 is a SEAL,PLAIN ENCASED.
What parts can replace 01-110-0002-4-ITEM 33?
There are 16 known substitutes for 01-110-0002-4-ITEM 33: SSRIF-1438ZZRA3P25LG68, 70077, SSRIF1438ZZA3LG20 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 01-110-0002-4-ITEM 33?
01-110-0002-4-ITEM 33 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-421-7928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01-110-0002-4-ITEM 33

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026