PartsTable
Technical Data Sheet
01 426 ✓ Verified by PartsTable
Displex · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

Real Glass (2D) with EASY-ON® Mounting Frame<br> <br>Tempered glass with rounded edges<br>All Displex protective glasses have a surface hardness of 10H and are therefore not only more scratch-, break- and shock-resistant than comparable brand products, but even surpass sapphire glass, which is used in luxury watches and has a hardness of 9H.<br>Even the edges, the area of the smartphone and protective glass most susceptible to breakage and impact, are specially hardened, rounded by 4-fold polishing and finished with a shock-absorbing edge. This elaborate production process further increases the protection against knocks and bumps and allows a particularly pleasant use of the smartphone. With these features, the protective glass is extremely resistant and guarantees maximum breakage resistance.<br> <br>Case-friendly<br>Our Displex protective glass is manufactured to within 5/100 mm of the smartphone contours and therefore fits perfectly on your Galaxy S7 edge.

In addition, the protectiv This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 7920-00-009-3737, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 01 426
NSN: 7920-00-009-3737
FSC: 7920
CAGE: 89942 — GOLDBLATT TOOL CO SUB OF AXIA INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shaft_typeROUND, FLATTED SINGLE ACTUATOR
flat_height0.219 INCHES NOMINAL SINGLE ACTUATOR IN
shaft_length0.750 INCHES NOMINAL SINGLE ACTUATOR IN
overall_width6.50 INCHES NOMINAL IN
pole_quantity1 SECOND SECTION FRONT
terminal_typeTAB W/SCREW
overall_height2.00 INCHES NOMINAL IN
overall_length11.875 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL SINGLE ACTUATOR IN
throw_quantity3 EACH SECTION FRONT
first_end_styleSQUARE
NSN7920-00-009-3737
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: Displex BRUSH,CLEANING,MASONRY TITLE COMPONENT PN 01 426 MFR Displex BRUSH,CLEANING,MASONRY
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH6.50 INCHES NOMINAL IN
OVERALL LENGTH11.875 INCHES NOMINAL IN
SPECIAL FEATURESWOOD HANDLE; TAMPICO FILL; OEM IS MARSHALLTOWN COMPANY
OVERALL HEIGHT2.00 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
1551-01N0REV1CID882059145Interchangeable
interchangeable cross-reference
interchangeable
7150WInterchangeable
interchangeable cross-reference
interchangeable
81551-01 3/8INInterchangeable
interchangeable cross-reference
interchangeable
8320TInterchangeable
interchangeable cross-reference
interchangeable
01426Interchangeable
interchangeable cross-reference
interchangeable
60273Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 01 426?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 01 426?
01 426 is a BRUSH,CLEANING,MASONRY manufactured by Displex. It is classified as a MRO (MRO_GENERAL).
What parts can replace 01 426?
There are 20 known substitutes for 01 426: 1551-01N0REV1CID882059145, 7150W, 81551-01 3/8IN and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 01 426?
01 426 is cataloged in the Federal Logistics Information System (FLIS) under NSN 7920-00-009-3737. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 01 426